Skip to content 
This session covers the usage of all surgical instruments and drills involved in the implant placement process. When positioning the implant into the bone, it is crucial to follow the measurements and guidelines provided during the training to ensure optimal clinical outcomes.
| Code | Platform Diameter | Gingival Height (H) |
|---|---|---|
| SLV 30108 | Ø4.0 | 2.5mm |
| SLV 30110 | Ø4.8 | 2.5mm |
| Code | Platform Diameter | Gingival Height (H) |
|---|---|---|
| SLV 30109 | Ø4.0 | 2.5mm |
| SLV 30111 | Ø4.8 | 2.5mm |
Open Tray Impression Parts are packed with SLV 16002 screw.
| Open Tray Screw |
|---|
| SLV 16002 |
| Analog |
|---|
| SLV 30201 |
All VenusCon Implants were surface roughened with the RBM (Resorbable Blast Media) process. To achieve the desired roughness, the implant is sandblasted with hardened Hydroxyapatite (beta-Tricalcium Phosphate, Alpha Tcp, Ttcp and Calcium Phosphate (CPP) particles and then dissolved from the surface by a defined passivation process. Studies have reported that implant surface roughness of min. RA 1-1.5 μm constitutes the ideal surface. As a result of the surface roughness analyzes performed on Medisolaris products, it was predicted that the RA values were higher than the accepted 1-1.5 μm, which would increase the bone-implant contact. The surface roughness of Medisolaris Dental Implants is realized as RA 2-2.5 μm.
This surface treatment is designed to roughen the implant surface without leaving any residual embedded sand particles or residue on the implant.
This process involves sandblasting the implant surface with Calcium Phosphate material to create a macro topography and then performing the passivation process to remove the embedded Hydroxyapatite Particles from the environment.
Consequently, it results in a greater surface area for Osseointegration, improved attachment properties, increased biological fixation, and a rougher implant surface than conventional acid etching, which maximizes Implant-Bone contact.
As a result of the Edax Analysis performed at Celal Bayar University, no elements that cause biocontamination and negatively affect osseointegration were found.
Thanks to the improved new RBM Surface, excellent values compatible with bone morphology have been achieved, ensuring faster and better osseointegration quality.
8mm
10mm
11mm
13mm
16mm
6mm
8mm
10mm
11mm
13mm
16mm
6mm
8mm
10mm
11mm
13mm
16mm
6mm
8mm
10mm
11mm
13mm
16mm
6mm
8mm
10mm
11mm
13mm
16mm
8mm
10mm
11mm
13mm
16mm
6mm
8mm
10mm
11mm
13mm
16mm
6mm
8mm
10mm
11mm
13mm
16mm
6mm
8mm
10mm
11mm
13mm
16mm
Venuscon® Implants are presented in sterile blister and tube with implant cover screw.
Make sure that the safety strip of the tube cover of the Venuscon® Implant in the sterile tube has not been opened before. The Cover on the hanger removed from the tube is removed by pulling in the axial direction. Transfer and Tightening Part is placed in such a way that the index direction and the implant index direction are parallel, and the implant is applied to the opened slot. Transfer and Tightening Part is removed by applying 5Ncm force.
Implant cover screw is removed by applying 5Ncm force with Conic Hex and by pulling in the axial direction.
All traceability is ensured by the UTAKSIS ERP program specially prepared for the medical sector, through to the Code and Lot Number on the product labels.
Sterilization was carried out with Gamma rays in accordance with the standard. Implants are presented in a sterile package, under suitable storage conditions, whose stability is guaranteed for 5 years.
Venuscon® Implants are manufactured with gamma ray resistant materials suitable for medical use, the implants are placed vertically in the Titanium Rings on the hanger. There is a Cover Screw at the bottom of the hanger. It is designed to be taken with a 1.25 Conical HEX Wrench, Implant tubes are placed in heat-sealed transparent Blister and Tyvek in compliance with medical and gamma irradiation standards.
It was successfully passed the double-leakage tests with Sealed Tube and Sealed Blister packaging.
Merkurhex® Implants are presented in sterile blister and tube with implant cover screw.
Make sure that the safety strip of the tube cover of the Merkurhex® Implant in the sterile tube has not been opened before. The Cover on the hanger removed from the tube is removed by pulling in the axial direction. Transfer and Tightening Part is placed in such a way that the index direction and the implant index direction are parallel, and the implant is applied to the opened slot. Transfer and Tightening Part is removed by applying 5Ncm force.
Implant cover screw is removed by applying 5Ncm force with Conic Hex and by pulling in the axial direction.
All traceability is ensured by the UTAKSIS ERP program specially prepared for the medical sector, through to the Code and Lot Number on the product labels.
Sterilization was carried out with Gamma rays in accordance with the standard. Implants are presented in a sterile package, under suitable storage conditions, whose stability is guaranteed for 5 years.
Merkurhex® Implants are manufactured with gamma ray resistant materials suitable for medical use, the implants are placed vertically in the Titanium Rings on the hanger. There is a Cover Screw at the bottom of the hanger. It is designed to be taken with a 1.25 Conical HEX Wrench, Implant tubes are placed in heat-sealed transparent Blister and Tyvek in compliance with medical and gamma irradiation standards.
It was successfully passed the double-leakage tests with Sealed Tube and Sealed Blister packaging.
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV NP201 | Ø3.8 | 1.0mm |
| SLV NP202 | Ø3.8 | 2.0mm |
| SLV NP203 | Ø3.8 | 3.0mm |
| SLV NP204 | Ø3.8 | 4.0mm |
| SLV NP205 | Ø3.8 | 5.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV RP206 | Ø4.7 | 1.0mm |
| SLV RP207 | Ø4.7 | 2.0mm |
| SLV RP208 | Ø4.7 | 3.0mm |
| SLV RP209 | Ø4.7 | 4.0mm |
| SLV RP210 | Ø4.7 | 5.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV WP211 | Ø5.7 | 1.0mm |
| SLV WP212 | Ø5.7 | 2.0mm |
| SLV WP213 | Ø5.7 | 3.0mm |
| SLV WP214 | Ø5.7 | 4.0mm |
| SLV WP215 | Ø5.7 | 5.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV NP251 | Ø3.8 | 1.0mm |
| SLV NP252 | Ø3.8 | 2.0mm |
| SLV NP253 | Ø3.8 | 3.0mm |
| SLV NP254 | Ø3.8 | 4.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV RP255 | Ø4.7 | 1.0mm |
| SLV RP256 | Ø4.7 | 2.0mm |
| SLV RP257 | Ø4.7 | 3.0mm |
| SLV RP258 | Ø4.7 | 4.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV WP259 | Ø5.7 | 1.0mm |
| SLV WP260 | Ø5.7 | 2.0mm |
| SLV WP261 | Ø5.7 | 3.0mm |
| SLV WP262 | Ø5.7 | 4.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV NP263 | Ø3.8 | 1.0mm |
| SLV NP264 | Ø3.8 | 2.0mm |
| SLV NP265 | Ø3.8 | 3.0mm |
| SLV NP266 | Ø3.8 | 4.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV RP267 | Ø4.7 | 1.0mm |
| SLV RP268 | Ø4.7 | 2.0mm |
| SLV RP269 | Ø4.7 | 3.0mm |
| SLV RP270 | Ø4.7 | 4.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV WP271 | Ø5.7 | 1.0mm |
| SLV WP272 | Ø5.7 | 2.0mm |
| SLV WP273 | Ø5.7 | 3.0mm |
| SLV WP274 | Ø5.7 | 4.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV NP301 | Ø3.8 | 1.0mm |
| SLV NP302 | Ø3.8 | 2.0mm |
| SLV NP303 | Ø3.8 | 3.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV RP304 | Ø4.7 | 1.0mm |
| SLV RP305 | Ø4.7 | 2.0mm |
| SLV RP306 | Ø4.7 | 3.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV WP307 | Ø5.7 | 1.0mm |
| SLV WP308 | Ø5.7 | 2.0mm |
| SLV WP309 | Ø5.7 | 3.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV NP351 | Ø3.8 | 1.0mm |
| SLV NP352 | Ø3.8 | 2.0mm |
| SLV NP353 | Ø3.8 | 3.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV RP354 | Ø4.7 | 1.0mm |
| SLV RP355 | Ø4.7 | 2.0mm |
| SLV RP356 | Ø4.7 | 3.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV WP357 | Ø5.7 | 1.0mm |
| SLV WP358 | Ø5.7 | 2.0mm |
| SLV WP359 | Ø5.7 | 3.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV NP360 | Ø3.8 | 1.0mm |
| SLV NP361 | Ø3.8 | 2.0mm |
| SLV NP362 | Ø3.8 | 3.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV RP363 | Ø4.7 | 1.0mm |
| SLV RP364 | Ø4.7 | 2.0mm |
| SLV RP365 | Ø4.7 | 3.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV WP366 | Ø5.7 | 1.0mm |
| SLV WP367 | Ø5.7 | 2.0mm |
| SLV WP368 | Ø5.7 | 3.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30850 | Ø4.2 | 0.8mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30851 | Ø4.2 | 0.8mm |
| Burn-Out Cap |
|---|
| SL 30903 |
| Abutment Screw |
|---|
| SLV 16000 |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV NP001 | Ø4.0 | 2.0mm |
| SLV RP002 | Ø4.7 | 2.0mm |
| SLV WP003 | Ø5.8 | 2.0mm |
| Code | Platform Diameter | Gingival Height (H) |
|---|---|---|
| SLV 30100 | Ø4.0 | 2.5mm |
| SLV 30102 | Ø4.8 | 2.5mm |
| Code | Platform Diameter | Gingival Height (H) |
|---|---|---|
| SLV 30101 | Ø4.0 | 2.5mm |
| SLV 30103 | Ø4.8 | 2.5mm |
Closed Tray Impression Parts are packed wtih SLV 16006 screw.
| Impression Part Ø4.5 (HEX) |
|---|
| SLV 30112 |
| Impression Part Ø4.5 (NO-HEX) |
|---|
| SLV 30113 |
| Closed Tray Screw |
|---|
| SLV 16004 |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30501 | Ø5.0 | 1.0mm |
| SLV 30502 | Ø5.0 | 2.0mm |
| SLV 30503 | Ø5.0 | 3.0mm |
| SLV 30504 | Ø5.0 | 4.0mm |
| SLV 30505 | Ø5.0 | 5.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30506 | Ø5.0 | 1.0mm |
| SLV 30507 | Ø5.0 | 2.0mm |
| SLV 30508 | Ø5.0 | 3.0mm |
| SLV 30509 | Ø5.0 | 4.0mm |
| SLV 30510 | Ø5.0 | 5.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30511 | Ø5.0 | 0.9mm / 2.2mm |
| SLV 30512 | Ø5.0 | 1.8mm / 3.2mm |
| SLV 30513 | Ø5.0 | 2.8mm / 4.2mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30514 | Ø5.0 | 2.0mm / 2.5mm |
| SLV 30515 | Ø5.0 | 3.0mm / 3.5mm |
| SLV 30516 | Ø5.0 | 4.0mm / 4.5mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30651 | Ø4.7 | 1.0mm |
| SLV 30653 | Ø4.7 | 1.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30652 | Ø4.7 | 1.0mm |
| SLV 30654 | Ø4.7 | 1.0mm |
Venuscon temporary abutment are made of Titanium Ti6Al4V ELI (Grade 23) and PEEK material for easy shapping. Available with HEX and NO-HEX options.
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30801 | Ø3.8 | 1.0mm |
| SLV 30802 | Ø3.8 | 2.0mm |
| SLV 30803 | Ø3.8 | 3.0mm |
| SLV 30804 | Ø4.7 | 1.0mm |
| SLV 30805 | Ø4.7 | 2.0mm |
| SLV 30806 | Ø4.7 | 3.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30808 | Ø3.8 | 1.0mm |
| SLV 30809 | Ø3.8 | 2.0mm |
| SLV 30810 | Ø3.8 | 3.0mm |
| SLV 30811 | Ø4.7 | 1.0mm |
| SLV 30812 | Ø4.7 | 2.0mm |
| SLV 30813 | Ø4.7 | 3.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30807 | Ø4.5 | 1.0mm |
| Scanning Part |
|---|
| SLV 30900 |
| Premill Abutment |
|---|
| SLV P3000 |
| Digital Analog |
|---|
| SLV 30202 |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30451 | Ø3.86 | 1.0mm |
| SLV 30452 | Ø3.86 | 2.0mm |
| SLV 30453 | Ø3.86 | 3.0mm |
| SLV 30454 | Ø3.86 | 4.0mm |
| SLV 30455 | Ø3.86 | 5.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30601 | Ø4.5 | 1.0mm |
| SLV 30602 | Ø4.5 | 2.0mm |
| SLV 30603 | Ø4.5 | 3.0mm |
| SLV 30604 | Ø4.5 | 4.0mm |
| SLV 30605 | Ø4.5 | 5.0mm |
| Metal Ring |
|---|
| SL 30905 |
| Transparent Ring Cap |
|---|
| SRF 083 |
| Ball Analog |
|---|
| SL 30203 |
| Locator Analog |
|---|
| SL 30204 |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV NP101 | Ø3.9 | 2.0mm |
| SLV NP102 | Ø3.9 | 4.0mm |
| SLV NP103 | Ø3.9 | 6.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV RP104 | Ø4.8 | 2.0mm |
| SLV RP105 | Ø4.8 | 4.0mm |
| SLV RP106 | Ø4.8 | 6.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV WP107 | Ø5.8 | 2.0mm |
| SLV WP108 | Ø5.8 | 4.0mm |
| SLV WP109 | Ø5.8 | 6.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV NP110 | Ø3.9 | 4.0mm |
| SLV NP111 | Ø3.9 | 6.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV RP112 | Ø4.8 | 4.0mm |
| SLV RP113 | Ø4.8 | 6.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV WP114 | Ø5.8 | 4.0mm |
| SLV WP115 | Ø5.8 | 6.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30119 | Ø4.0 | 6.0mm |
| SLV 30120 | Ø4.8 | 6.0mm |
| Code | Platform Diameters | Gingival Height (H) |
|---|---|---|
| SLV 30121 | Ø5.8 | 6.0mm |
Optimized by Seraphinite Accelerator
